DEFINITION OF WEAR RESISTANCE OF A NEW TYPE OF POLYMER MATERIAL OBTAINED FROM SECONDARY POLYETHYLENE

doi:10.56292/SJFSU/vol31_iss4/a%p

Mualliflar

Qarshi davlat universiteti

https://orcid.org/0009-0007-5423-7694
Qarshi davlat universiteti

https://orcid.org/0000-0001-7867-4185

DOI:

https://doi.org/10.56292/SJFSU/vol31_iss4/a%25p

Kalit so‘zlar:

Keywords: secondary polyethylene, melamine, oxygen index, natural wool, bitumen, thermal degradation, fire tube.

Annotatsiya

The aim of this article is to obtain a new type of polymer material by recycling low-density polyethylene waste based on chemical binders and fillers, as well as to study the fire-resistant properties of the obtained new type of polymer material. To obtain a new type of polymer material, sulfur and melamine were used as chemical binders, and bitumen, natural wool and aluminum oxide were used as fillers. This material describes the formation of bonds between melamine and sulfur molecules when secondary polyethylene is added to the composition. The fire resistance of the obtained new type of polymeric materials was studied using the “Combustible Pipe” method in accordance with GOST requirements. During the study, the oxygen index of the polymer material obtained by adding various additives was compared with the oxygen index of recycled polyethylene. Based on the obtained results, it was proven that aluminum oxide and melamine, which have a high melting point and are part of secondary polyethylene, contribute to increasing the fire resistance of the polymer material.

Mualliflar haqida

, Qarshi davlat universiteti

Qarshi davlat universiteti katta o‘qituvchisi, t.f.f.d. (PhD)
, Qarshi davlat universiteti

Qarshi davlat universiteti, kimyo fanlari nomzodi, dotsent

Adabiyotlar

Гиревая Х.Я., Гиревой Т.А. Изучение свойств продуктов химической деструкции ПЭТ // Общество, наука и инновации: сборник статей Международной научно-практической конференции: в 4-х частях / отв. ред. А.А. Сукиасян. – Уфа, – 2013. – С. 27-30.

Frączak D. Chemical recycling of polyolefins (PE, PP): modern technologies and products //Waste Material Recycling in the Circular Economy- Challenges and Developments. – IntechOpen, – 2021. http://dx.doi.org/10.5772/intechopen.99084

Abdurashidov T.R. Plastmassalarni qayta ishlash texnologiyasi [Plastics processing technology] //Science and Technology. Tashkent. – 2010. – B. 120.

Гукова В.А., Ершова О.В. Эксплуатационные характеристики композиционных материалов на основе вторичного полипропилена и техногенных минеральных отходов //Приоритетные научные направления: от теории к практике. – 2014. – №. 11. – С. 149-154.

Рудакова А.Э., Одородько П.В. Особенности переработки изделий из полиэтилена // Международный научный журнал «Вестник науки». – 2022. – № 5 (50). – Т. 5. – С. 327-332.

Mamatova Sh.B., Qurbanov M.J., Toʻrayeva M. Ikkilamchi polietilen asosidagi polimer kompozitsion materiallarning kislorod indeksini aniqlash //Kimyoning dolzarb muammolari. Respublika ilmiy-amaliy konferensiya. – Urganch, – 2024. – 21 iyun. –B. 395-396.