JINLASH JARAYONINI TAKOMILLASHTIRISH ASOSIDA TOLA SIFATINI YAXSHILASH

Anvarjon Otaxo’jayev; Shuxratjon Komilov; Rustam Muradov

Physics and technology

No. 2 (2025): FarDU.Ilmiy xabarlar jurnali (Aniq fanlar)

IMPROVEMENT OF FIBER QUALITY BASED ON IMPROVEMENT OF THE SPINNING PROCESS

Anvarjon Otaxo’jayev^▸^▾
Shuxratjon Komilov^▸^▾
Rustam Muradov^▸^▾

PDF (Uzbek)

Submitted: July 22, 2025
Published: 2025-07-28

Abstract

In this paper, the effects of machine operation and processing on fiber quality are studied by the authors. The design of the working elements is designed to ensure smooth and efficient production of the gin machine by improving the working process.

References

Sh. Komilov, A. Sarimsakov, R. Muradov.(2023). Analysis of the quality indicators of the seed separate from the fiber after spinning. Research Focus, Uzbekistan, 2 (4)
Juraeva, G., Komilov, S., Mamadaliyev, N., & Muradov, R. (2024). Study on the qualitative indicators of raw cotton and fiber during the ginning process. In E3S Web of Conferences (Vol. 563, p. 03063). EDP Sciences.
Nodirbek, M., Shukhratjon, K., Mashkhura, S., & Akmal, U. (2024). STUDY OF THE DISTRIBUTION PROCESS IN PIPES IN THE DIFFERENT AIR FLOW TRANSMISSION ZONE. Universum: технические науки, 9(4 (121)), 47-49.
Nodirbek, Mamadaliev, Komilov Shukhratjon, and Akhmedxodjaev Khamit. "Influence of the Ginning Process on the Quality of Raw Cotton." Engineering 13.12 (2021): 739-748.
Rokhmonov, Durbek, and Akramjon Sarimsakov. "Theoretical study of the process of separation of hairless seeds from seed fibre." Conferencea (2022): 14-18.
Жураева, Г. Р., and Ш. Р. Комилов. "ОСНОВНЫЕ ТРЕБОВАНИЯ, ПРЕДЪЯВЛЯЕМЫХ К РАБОТЕ ПИЛЬНЫХ ДЖИН." Mexatronika va robototexnika: muammolar va rivojlantirish istiqbollari 1.1 (2023): 158-160.
AU Sarimsakov, RM Muradov Analysis of the Works of the Performed Scientific Research on the Improvement of the Saw Jean Design. - Scientific Bulletin of Namangan State University, 2021
Sarimsakov, Akramjon, Rustam Muradov, and Batirjon Mardonov. "Modeling of the Process of Interaction of the Saw Cylinder with the Raw Material in the Process of Ginning." TEST Engineering and Managemant (Scopus) May-June (2020): 27386-27391.
Rejabboev, Sokhibjon, Rustam Muradov, and Akramjon Sarimsakov. "Residual fiber study in fiber-separated seeds." Asian Journal Of Multidimensional Research 10.4 (2021): 783-787.
Muradov, Rustam, Akramjon Sarimsakov, and Soxib Rejabboev. "Improving the seed sorting device to increase natural fiber yield at cotton ginning enterprises." E3S Web of Conferences. Vol. 486. EDP Sciences, 2024.

Most read articles by the same author(s)

Anvarjon Otaxo’jayev , Shuxratjon Komilov , Rustam Muradov , IMPROVEMENT OF FIBER QUALITY BASED ON IMPROVEMENT OF THE SPINNING PROCESS. , Scientific journal of the Fergana State University: No. 1 (2025): FarDU ilmiy xabarlari jurnali (ANIQ FANLAR)

[1] Sh. Komilov, A. Sarimsakov, R. Muradov.(2023). Analysis of the quality indicators of the seed separate from the fiber after spinning. Research Focus, Uzbekistan, 2 (4)

[2] Juraeva, G., Komilov, S., Mamadaliyev, N., & Muradov, R. (2024). Study on the qualitative indicators of raw cotton and fiber during the ginning process. In E3S Web of Conferences (Vol. 563, p. 03063). EDP Sciences.

[3] Nodirbek, M., Shukhratjon, K., Mashkhura, S., & Akmal, U. (2024). STUDY OF THE DISTRIBUTION PROCESS IN PIPES IN THE DIFFERENT AIR FLOW TRANSMISSION ZONE. Universum: технические науки, 9(4 (121)), 47-49.

[4] Nodirbek, Mamadaliev, Komilov Shukhratjon, and Akhmedxodjaev Khamit. "Influence of the Ginning Process on the Quality of Raw Cotton." Engineering 13.12 (2021): 739-748.

[5] Rokhmonov, Durbek, and Akramjon Sarimsakov. "Theoretical study of the process of separation of hairless seeds from seed fibre." Conferencea (2022): 14-18.

[6] Жураева, Г. Р., and Ш. Р. Комилов. "ОСНОВНЫЕ ТРЕБОВАНИЯ, ПРЕДЪЯВЛЯЕМЫХ К РАБОТЕ ПИЛЬНЫХ ДЖИН." Mexatronika va robototexnika: muammolar va rivojlantirish istiqbollari 1.1 (2023): 158-160.

[7] AU Sarimsakov, RM Muradov Analysis of the Works of the Performed Scientific Research on the Improvement of the Saw Jean Design. - Scientific Bulletin of Namangan State University, 2021

[8] Sarimsakov, Akramjon, Rustam Muradov, and Batirjon Mardonov. "Modeling of the Process of Interaction of the Saw Cylinder with the Raw Material in the Process of Ginning." TEST Engineering and Managemant (Scopus) May-June (2020): 27386-27391.

[9] Rejabboev, Sokhibjon, Rustam Muradov, and Akramjon Sarimsakov. "Residual fiber study in fiber-separated seeds." Asian Journal Of Multidimensional Research 10.4 (2021): 783-787.

[10] Muradov, Rustam, Akramjon Sarimsakov, and Soxib Rejabboev. "Improving the seed sorting device to increase natural fiber yield at cotton ginning enterprises." E3S Web of Conferences. Vol. 486. EDP Sciences, 2024.