SURFACE FORMATION OF MOLYBDENUM FOILS VIA ANODIZATION AND LASER IRRADIATION FOR CATALYTIC APPLICATIONS
DOI:
https://doi.org/10.56292/SJFSU/vol31_iss4/a112Kalit so‘zlar:
electrochemical anodization, picosecond laser, molybdenum foil, oxalic acid electrolyte, developed surfaces, surface morphology, composition.Annotatsiya
This study investigates the formation of developed surface modification of molybdenum foils through electrochemical anodization in oxalic acid and picosecond pulsed laser irradiation. The resulting surface morphology, elemental composition, and crystallinity were analysed using SEM, EDS, and XRD methods. Anodization process produced a rough, none-uniform surfaces, while laser treatment achieved uniform micro-crystalline arrays. Advanced surface and micro-crystalline arrays by pulsed laser irradiation will open new ways in the field of catalytic applications.
Adabiyotlar
[1] F. Seifikar, S. Azizian, A. Nasri, and B. Jaleh, “Photo-thermal conversion properties of Cr, Mo, and W nanofluids in polyethylene glycol prepared by laser ablation in liquid method for direct absorption solar collectors applications,” Therm. Sci. Eng. Prog., vol. 45, no. March, p. 102084, 2023, doi: 10.1016/j.tsep.2023.102084.
[2] D. Giziński, A. Brudzisz, J. S. Santos, F. Trivinho-Strixino, W. J. Stępniowski, and T. Czujko, “Nanostructured anodic copper oxides as catalysts in electrochemical and photoelectrochemical reactions,” Catalysts, vol. 10, no. 11, pp. 1–38, 2020, doi: 10.3390/catal10111338.
[3] S. Zhu et al., “Enhanced performance of Mo-doped TiNb2O7 anode material for lithium-ion batteries via KOH sub-molten salt synthesis,” Appl. Surf. Sci., vol. 669, no. June, p. 160507, 2024, doi: 10.1016/j.apsusc.2024.160507.
[4] A. Brudzisz et al., “Low-voltage anodizing of copper in sodium bicarbonate solutions,” Electrochim. Acta, vol. 443, no. November 2022, 2023,
doi: 10.1016/j.electacta.2023.141918.
[5] S. A. Korniy, S. A. Halaichak, M. R. Chuchman, V. A. Vynar, and B. M. Datsko, “Effect of anodic treatment on the electrocatalytic activity of electrodeposited Ni-Mo coatings as cathode materials for hydrogen evolution reaction,” Colloids Surfaces A Physicochem. Eng. Asp., vol. 705, no. P1, p. 135677, 2025, doi: 10.1016/j.colsurfa.2024.135677.
[6] C. Liu, C. Li, K. Ahmed, Z. Mutlu, C. S. Ozkan, and M. Ozkan, “Template free and binderless NiO nanowire foam for li-ion battery anodes with long cycle life and ultrahigh rate capability,” Sci. Rep., vol. 6, no. March, pp. 1–8, 2016, doi: 10.1038/srep29183.
[7] R. Hong et al., “Fabrication and photocatalytic property of MoOx nanoparticle films from Mo target by laser ablation at ambient conditions,” Opt. Mater. (Amst)., vol. 99, no. December 2019, p. 109589, 2020, doi: 10.1016/j.optmat.2019.109589.
[8] D. Gizinski, A. Brudzisz, M. R. Alzahrani, K. K. Wang, W. Z. Misiołek, and W. J. Stepniowski, “Formation of cuox nanowires by anodizing in sodium bicarbonate solution,” Crystals, vol. 11, no. 6, 2021, doi: 10.3390/cryst11060624.
[9] X. He, Y. Li, J. Yang, G. Zeng, and L. Wu, “Co-deposition of Ni-Mo alloy film catalysts for hydrogen evolution from an ethylene glycol system,” RSC Adv., vol. 14, no. 46, pp. 34165–34174, 2024, doi: 10.1039/d4ra06466f.
Yuklab olishlar
Nashr etilgan
Son
Bo‘lim
Litsenziya
Mualliflik huquqi (c) 2025 Scientific journal of the Fergana State University
Ushbu ish Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 Xalqaro litsenziyasi ostida litsenziyalangan.
Qanday iqtibos keltirish
