TAKOMILLASHTIRILGAN ISHCHI QISMGA EGA BO‘LGAN ARRALI JINNI ISHLAB CHIQISH

Sharof Shuxratov; Nurzod Yunusov

Physics and technology

No. 2 (2025): FarDU.Ilmiy xabarlar jurnali (Aniq fanlar)

DEVELOPMENT OF AN IMPROVED SAW GIN WITH A WORKING ELEMENT

Sharof Shuxratov^▸^▾
Nurzod Yunusov^▸^▾

PDF (Uzbek)

Submitted: July 23, 2025
Published: 2025-07-28

Abstract

In this work, the design of traditional saw gins has been improved, with modernization of the working parts—saw discs, brush drums, and seed separation mechanisms. The improved model takes into account the optimal shape and arrangement of the saws, reduces fiber damage, increases energy efficiency, and introduces a waste reduction mechanism.

References

X. T. Shukurov, N. A. Yuldashev. "Ishlab chiqarish samaradorligini oshirishda yangi avlod arrali jinlari". Tashkent, 2018.
S. A. Tashkentov, F. B. Maxmudov. "Texnologik jarayonlarni avtomatlashtirish: Arrali jinlar va ularning samaradorligi". Farg‘ona, 2020.
P. M. Vasiliev. "Texnologik jarayonlarni takomillashtirish: Arrali jinlarning ishlash printsipi va yangi konstruktsiyalar". M., 2017.
D. I. Orlov. "Paxta sanoatida yangi texnologiyalar va ularning ishlab chiqarish samaradorligiga ta'siri". "Paxtachilik texnologiyalari" jurnali, 2021, 42-45 bet.
A. G. Dmitriev, O. A. Ivanov. "Arrali jinlar va ularning optimal shakllarini ishlab chiqish: Energiya tejash va chiqindilarni kamaytirish". "Texnologik ta’minot" ilmiy jurnali, 2019, 58-60 bet.
M. R. Rakhimov. "Paxta terish texnologiyalari va arrali jinlarni optimallashtirish". Samarqand, 2022.
L. V. Karlov. "Yangi texnologiyalarni joriy qilishda avtomatlashtirish va samaradorlikni oshirish". "Mehnat va texnika" jurnali, 2020, 102-104 bet.
B. R. Azimov, A. B. G‘ulomov. "Arrali jinlarning texnik va iqtisodiy tahlili". Tashkent, 2019.
S. S. Shukurov, M. A. Bobojonov. "Arrali jinlarni ishlab chiqarish texnologiyalarini takomillashtirish: Energiya va resurslarni tejash". "Sanoat texnologiyalari" jurnali, 2021, 18-22 bet.
N. O. Toshpulatov, Z. X. Akhmedov. "Chiqindilarni kamaytirish mexanizmlarini ishlab chiqish va ularning paxta sanoatida qo‘llanilishi". "Ekologik texnologiyalar" jurnali, 2022, 30-33 bet.

Most read articles by the same author(s)

Naimaxon Raxmatova, Sharof Shuxratov, FORMATION OF TECHNOLOGICAL COMPETENCES IN STUDENTS ON THE BASIS OF INNOVATION IN TECHNOLOGICAL EDUCATION , Scientific journal of the Fergana State University: No. 3 (2022): Scientific journal of the Fergana State University
Mushtariy Abdullayeva, Sharof Shuxratov, PEDAGOGICAL AND PSYCHOLOGICAL OPPORTUNITIES OF TEACHING A NATIONAL HANDICRAFT IN TECHNOLOGICAL EDUCATION ON THE BASIS OF A CREATIVE APPROACH , Scientific journal of the Fergana State University: No. 3 (2022): Scientific journal of the Fergana State University
Nazokat Abdukarimova, Sharof Shuxratov, METHODS OF TEACHING THE SUBJECT OF TECHNICAL MECHANICS IN DIRECTION OF TECHNOLOGICAL EDUCATION , Scientific journal of the Fergana State University: No. 3 (2022): Scientific journal of the Fergana State University
Sharof Shuxratov , Barchinoy Askarova , DEVELOPING STUDENTS' TRANSVERSAL COMPETENCIES BASED ON AN INTEGRATIVE APPROACH , Scientific journal of the Fergana State University: No. 6 (2024): FarDU.Ilmiy xabarlar jurnali (Aniq va tabiiy fanlar)
Barnoxon Mamatojiyeva, Sharof Shuxratov, TEXNOLOGIY OF MAKING SIMPLE ITEMS AND DETAILS FROM WOOD , Scientific journal of the Fergana State University: No. 3 (2022): Scientific journal of the Fergana State University
Sharof Shuxratov , Gulmira Butayeva , DEVELOPING METHODOLOGICAL COMPETENCE OF FUTURE TECHNOLOGICAL EDUCATION TEACHERS BASED ON A TRANSFORMATIONAL APPROACH , Scientific journal of the Fergana State University: No. 6 (2024): FarDU.Ilmiy xabarlar jurnali (Aniq va tabiiy fanlar)
Xasan Raxmonjonov, Sharof Shuxratov, Sharof Shuxratov, USING INFORMATION TECHNOLOGIES IN TEACHING MODERN ELECTRICAL EQUIPMENT , Scientific journal of the Fergana State University: No. 3 (2022): Scientific journal of the Fergana State University
Sharof Shuxratov, Nurzod Yunusov, DEVELOPMENT OF AN IMPROVED SAW GIN WITH A WORKING ELEMENT. , Scientific journal of the Fergana State University: No. 1 (2025): FarDU ilmiy xabarlari jurnali (ANIQ FANLAR)

[1] X. T. Shukurov, N. A. Yuldashev. "Ishlab chiqarish samaradorligini oshirishda yangi avlod arrali jinlari". Tashkent, 2018.

[2] S. A. Tashkentov, F. B. Maxmudov. "Texnologik jarayonlarni avtomatlashtirish: Arrali jinlar va ularning samaradorligi". Farg‘ona, 2020.

[3] P. M. Vasiliev. "Texnologik jarayonlarni takomillashtirish: Arrali jinlarning ishlash printsipi va yangi konstruktsiyalar". M., 2017.

[4] D. I. Orlov. "Paxta sanoatida yangi texnologiyalar va ularning ishlab chiqarish samaradorligiga ta'siri". "Paxtachilik texnologiyalari" jurnali, 2021, 42-45 bet.

[5] A. G. Dmitriev, O. A. Ivanov. "Arrali jinlar va ularning optimal shakllarini ishlab chiqish: Energiya tejash va chiqindilarni kamaytirish". "Texnologik ta’minot" ilmiy jurnali, 2019, 58-60 bet.

[6] M. R. Rakhimov. "Paxta terish texnologiyalari va arrali jinlarni optimallashtirish". Samarqand, 2022.

[7] L. V. Karlov. "Yangi texnologiyalarni joriy qilishda avtomatlashtirish va samaradorlikni oshirish". "Mehnat va texnika" jurnali, 2020, 102-104 bet.

[8] B. R. Azimov, A. B. G‘ulomov. "Arrali jinlarning texnik va iqtisodiy tahlili". Tashkent, 2019.

[9] S. S. Shukurov, M. A. Bobojonov. "Arrali jinlarni ishlab chiqarish texnologiyalarini takomillashtirish: Energiya va resurslarni tejash". "Sanoat texnologiyalari" jurnali, 2021, 18-22 bet.

[10] N. O. Toshpulatov, Z. X. Akhmedov. "Chiqindilarni kamaytirish mexanizmlarini ishlab chiqish va ularning paxta sanoatida qo‘llanilishi". "Ekologik texnologiyalar" jurnali, 2022, 30-33 bet.