sg

Scientific information

No. 6 (2023): FarDU.Ilmiy xabarlar jurnali (Aniq va tabiiy fanlar)

GENERAL STRUCTURE OF INTERNAL COMBUSTION ENGINES AS WELL AS WORKING CYCLES OF 2-AND 4-STROKE ENGINES, THE STRUCTURE OF THE LUBRICATION SYSTEM, AS WELL AS PERFORMANCE

Submitted
February 10, 2024
Published
2024-02-10

Abstract

In modern vehicles, mainly internal combustion engines are common. In terms of construction, internal combustion engines are divided into porches and rotors. Autom obils mainly use porcelain internal combustion engines. In piston engines, the pressure generated by the combustion of the fuel in the expansion of the gas is absorbed by the piston, and in the direction of straight-line advance and return, the elbow Valve is moved in a circular motion.

References

  1. Solihov I.S. Traktorlar va avtomobillar. Darslik - T.: “Cholpon”, 2012. - 512 b.
  2. Maxkamov Q.X. va b. Traktor konstruksiyalari. Darslik 1,2 - qism. - T.: “O‘zbekiston milliy ensiklopediyasi”, 2014. - 526/542 б.
  3. Muhiddinov A. va b. Transport vositalarining tuzilishi. Darslik. –T.: “Cholpon”, 2014. -232 b.
  4. Caroll E. Georing, Marvin L. Stone, David W. Smith, Paul K. Turnquist. ”Of-Road vehicle Engineering principles”, American Society of Agricultural Engineers, 2006.
  5. David A. Crolla. ”Automotive Engineering Powertrain, Chassis System and Vehicle Body”, Amsterdam, Butterworth-Heinemann is an imprint of Elsevier, 2009.
  6. Вахламов В.К., Шатров М.Г., Юрчевский А.А.. Теория и конструкция автомобиля и двигателя. –М.: «Академия», 2003. - 816 с.
  7. «Тракторы. Конструкция». / Под общей редакцией И.П.Ксеневича, В.М.Шарипова. -М.: «Машинастроение», 2001. - 821 с.
  8. Родичев В.А. Тракторы. -М.: «Профобриздат», 2001. - 256с